Metal Roofing Cost in Fort Lauderdale (2026)

Real installed pricing by panel system, with the HVHZ code, coastal aluminum upgrades, and insurance credits that determine what a Fort Lauderdale metal roof actually costs.

Quick Answer

Metal roof costs in Fort Lauderdale 2026 — standing seam $26,000-$45,000, 5V crimp $18,000-$28,000, ribbed $15,000-$22,000 for a typical 2,000 sq ft home. HVHZ-compliant installation and coastal-grade aluminum upgrades add 10-20%. All Phase Construction USA installs to Miami-Dade NOA spec with 50-year manufacturer warranty options.

Quick Answer

A quality metal roof on a typical 22-square Fort Lauderdale home runs $20,000 to $34,000 installed in 2026, with coastal-grade aluminum standing seam pushing closer to $42,000. Pricing depends on panel system, gauge, color finish, and how close the home sits to the ocean. Below is the full per-square breakdown, the line items every quote should include, and the insurance and lifespan numbers that explain why metal usually wins on total cost of ownership in HVHZ.

Fort Lauderdale Metal Roof Pricing by System

Metal roofing is priced by panel system rather than by brand, because the labor, fastener pattern, and underlayment requirements change dramatically between systems. The ranges below assume a clean tear-off, full HVHZ scope, and a standard residential color from a Kynar 500 paint warranty program.

SystemPer Square22-Square HomeLifespan
5V-Crimp Galvalume$950 – $1,200$20,900 – $26,40040 – 50 yrs
Exposed-Fastener R-Panel$900 – $1,150$19,800 – $25,30030 – 40 yrs
Standing-Seam (Snap-Lock)$1,200 – $1,550$26,400 – $34,10050+ yrs
Standing-Seam (Mechanical Lock)$1,400 – $1,800$30,800 – $39,60050+ yrs
Aluminum Standing-Seam (Coastal)$1,500 – $1,950$33,000 – $42,90050+ yrs

Steep pitches, complex hip-and-valley layouts, second stories, and ocean-front exposures all push pricing toward the top of each range.

What's Inside a Fort Lauderdale Metal Roof Quote

A complete metal roof quote in Fort Lauderdale should itemize every one of the following:

  • Tear-off and dump fees for the existing shingle, tile, or metal roof.
  • Deck inspection, plywood replacement, and HVHZ re-nail with 8d ring-shank fasteners.
  • Peel-and-stick high-temperature secondary water barrier rated for metal roofs.
  • Engineered clip and fastener pattern per Florida Product Approval (NOA) for 170+ mph uplift.
  • Primary metal panels — 24-gauge steel or .032 / .040 aluminum for coastal homes.
  • Custom-fabricated trim, ridge cap, valleys, hips, and end-wall flashing.
  • High-temp ice and water shield in all valleys and around penetrations.
  • New pipe boots, vent collars, and watertight curbs for any skylights or AC stands.
  • City of Fort Lauderdale permit, plan review, and required inspections.
  • Wind-mitigation report so your insurer can apply every available premium credit.
  • Manufacturer paint warranty registration (typically 35 – 45 years on Kynar 500 finishes).

If a quote does not break these out, ask the contractor to put each line on the contract before you sign. It is the single best way to spot a low-baller who plans to nickel-and-dime you on flashing or underlayment later.

Aluminum vs Steel: The Coastal Decision

Fort Lauderdale runs from the Intracoastal east to the Atlantic, and the closer a home sits to the ocean, the more aggressive salt corrosion becomes. 24-gauge Galvalume steel is the workhorse of metal roofing across most of Broward County and will last 40 to 50 years inland, but inside one mile of the coast we routinely see edge rust on steel panels within 8 to 12 years. .032 or .040 aluminum standing seam is impervious to salt corrosion and is the only metal we install on barrier-island and beach-block homes. The aluminum upgrade adds roughly $2,000 to $4,000 on a typical Fort Lauderdale home and pays for itself in avoided premature replacement.

How HVHZ Code Shapes the Price

Every metal panel system installed in Broward County must hold a current Florida Product Approval (NOA) for the specific deck, underlayment, fastener, and clip combination. That approval dictates the fastener pattern (typically 12 inches on center in the field, 6 inches at perimeter and corners), the clip spacing, and the minimum panel gauge. HVHZ also requires high-temperature peel-and-stick underlayment that can withstand the heat trapped under a metal panel without bleeding adhesive. These code items add roughly $1,500 to $3,000 over a non-HVHZ install of the same panel — and they are non-negotiable.

Insurance Credits and the 40-Year Math

A code-compliant metal roof in Fort Lauderdale typically earns the maximum roof-cover credit (FBC equivalent), the maximum roof-deck attachment credit, and a secondary water resistance credit on a wind-mitigation inspection. Combined, those credits cut a typical Broward homeowners premium by $400 to $1,400 per year. Over a 40-year metal roof lifespan, that is $16,000 to $56,000 in insurance savings — on top of avoiding the cost of one full shingle replacement at year 18 or 20. That is the math that makes metal the better lifetime value in HVHZ even when the upfront price is higher.

Permit and Inspection Fees

The City of Fort Lauderdale Building Department charges roofing permit fees based on job valuation. For a typical metal roof replacement, expect $400 to $900 in permit fees plus the Florida state surcharge. The permit covers plan review, an in-progress dry-in inspection, and a final inspection. All Phase Construction USA pulls every permit under our license and schedules every inspection so you never have to call the city.

Why Choose All Phase for a Fort Lauderdale Metal Roof

All Phase Construction USA is dual-licensed in Florida as a Certified Roofing Contractor (CCC1333509) and a Certified General Contractor (CGC1535474), with deep experience installing every NOA-approved metal system in Broward and Palm Beach County. Every quote includes the full HVHZ scope, custom-fabricated flashing, the wind-mitigation report, and manufacturer paint warranty registration up front. For the full picture of your panel options, see our metal roofing service overview.

Frequently Asked Questions

How much does a metal roof cost in Fort Lauderdale in 2026?

A 22-square Fort Lauderdale home runs roughly $20,000 to $34,000 for a quality metal roof installed to HVHZ code. Exposed-fastener systems sit at the lower end, snap-lock standing seam in the middle, and mechanical-lock or aluminum coastal panels at the top. Pricing includes tear-off, peel-and-stick underlayment, custom flashing, and the wind-mitigation report.

Why does a metal roof cost more than shingles in Fort Lauderdale?

Metal panels themselves cost two to three times more than asphalt shingles, and the trim and flashing are custom-fabricated for each roof. You are also paying for a 50-year roof instead of an 18-year roof. Over a 40-year horizon, the total cost of ownership is usually lower with metal once you factor in one fewer replacement, lower insurance premiums, and a 5 – 15% energy savings from a reflective Kynar finish.

Will a metal roof lower my home insurance in Broward County?

Almost always. A properly documented metal roof with a wind-mitigation report typically earns the maximum roof-cover and roof-deck attachment credits, which can reduce a Fort Lauderdale homeowners premium by $400 to $1,400 per year. The savings often pay for the cost difference vs shingles within 10 to 12 years.

Is metal roofing worth it for a coastal Fort Lauderdale home?

For homes east of Federal Highway, aluminum standing seam is the smart play. Aluminum does not rust in salt-laden air, while galvanized steel can show edge corrosion within 8 to 12 years near the ocean. The upgrade from 24-gauge steel to .032 aluminum adds roughly $2,000 to $4,000 on a typical home and is almost always worth it inside one mile of the coast.

Get Your Free Fort Lauderdale Metal Roof Quote

An All Phase project manager will be on your roof within 48 hours and your fixed quote will be in your inbox within 24 hours after that.

Serving Fort Lauderdale & All of Broward County | Licensed & Insured | CCC1333509 | CGC1535474

Related Metal Roofing Guides in Broward County

Considering metal roofing in Broward County? These related guides cover cost and conversion specifics for nearby cities.

Call: 754-227-5605