Roofing Services — Residential & Commercial Solutions for South Florida
All Phase Construction USA is a dual-licensed roofing and general contractor serving Broward and Palm Beach Counties since 2006. With over 2,500 completed projects and certifications from Owens Corning, CertainTeed, and Tamko, we specialize in HVHZ-compliant roofing built to South Florida's 146 mph wind load requirements. From single-family homes to commercial properties and HOA communities — every project is permitted, inspected, and backed by manufacturer warranty documentation.
Residential Roofing
Complete roof replacement, repair, and inspection services for South Florida homeowners. Every residential project includes HVHZ-compliant installation, proper permitting, and manufacturer warranty documentation.
Residential Roofing
Full-service residential roofing for South Florida homes — replacements, repairs, and inspections built to Broward and Palm Beach County codes.
Tile Roofing
Concrete and clay tile installation and repair. Proper foam adhesive application, verified flashing, and HVHZ wind-code compliance.
Metal Roofing
Standing seam and corrugated metal roof systems. Wind-resistant, energy-efficient, and rated for 150+ mph winds in South Florida.
Shingle Roofing
Architectural and impact-resistant shingle installation. Owens Corning Platinum and CertainTeed Master certified contractor.
Flat Roofing
Built-up roofing (BUR), TPO, modified bitumen, and single-ply systems for flat and low-slope residential roofs.
Commercial Roofing
All Phase Construction USA holds dual licenses — General Contractor (CGC-1526236) and Roofing Contractor (CCC-1331464) — allowing us to handle structural and roofing work under one contract. We serve commercial buildings, multi-family properties, HOA communities, and condo associations throughout Broward and Palm Beach Counties. Our team works directly with property managers and HOA boards to minimize disruption and keep projects on schedule.
Commercial Roofing
Full commercial roofing services for offices, warehouses, retail, and multi-family buildings. Flat roof specialists with TPO, EPDM, and built-up systems.
Roof Maintenance Programs
Preventive maintenance plans for commercial properties and HOA communities. Extend your roof's life and catch problems before they become emergencies.
Inspections, Repairs & Process
From initial inspection through final permit sign-off — understand what goes into a professional roofing project.
Roof Inspection
Comprehensive roof inspections for insurance claims, real estate transactions, storm damage assessment, and preventive maintenance.
Roof Repair
Emergency and scheduled roof repairs across Broward and Palm Beach Counties. Leak detection, flashing repair, tile replacement, and storm damage restoration.
Roof Replacement Process
Our 10-step roof replacement process from initial assessment through final inspection and permit closure. Know exactly what to expect.
Pricing, Estimates & Financing
Transparent pricing, free estimates, and flexible financing to make your roofing project affordable.
Roof Cost Calculator
Get an instant ballpark estimate for your roof replacement based on roof type, material, and square footage.
Pricing Guide
Understand what goes into the cost of a roof in South Florida — materials, labor, permits, and code compliance.
Financing Options
Flexible payment plans through our FHA Title I lending partner, Service Finance Company. Make your roof affordable.
Areas We Serve
Licensed and insured across Broward and Palm Beach Counties, FL. We serve residential and commercial properties in every municipality we work in — pulling all permits, meeting local wind codes, and ensuring full code compliance on every project. Want to see how All Phase stacks up? Read our independent review of the top-rated roofers in Deerfield Beach.
Why South Florida Trusts All Phase Construction
Dual Licensed
Both General Contractor (CGC-1526236) and Roofing Contractor (CCC-1331464). We handle structural and roofing work under one roof.
HVHZ Certified
Built for South Florida's High-Velocity Hurricane Zone. Every installation meets 146 mph wind load requirements.
Manufacturer Certified
Owens Corning Platinum, CertainTeed Master, Tamko Pro Platinum certified contractor.
20+ Years Experience
Protecting South Florida properties since 2006. Over 2,500 projects completed.
Full Permitting
We pull all permits, schedule all inspections, and ensure code compliance. No shortcuts.
Financing Available
Flexible payment plans through FHA Title I lender Service Finance Company, LLC.
Roofing in South Florida Is Different
South Florida's climate demands more from your roof than almost anywhere else in the country. Understanding these challenges helps you make better decisions about materials, contractors, and maintenance.
Hurricane & Wind Damage
Broward County falls within Florida's High-Velocity Hurricane Zone, requiring all roofing installations to meet 146 mph wind load standards. This means specific fastener patterns, enhanced underlayment, and tested assembly systems — not just any contractor can legally perform this work. Every project requires NOA (Notice of Acceptance) or FL Product Approval documentation for materials and installation methods.
UV & Heat Exposure
South Florida roofs endure over 230 sunny days per year with surface temperatures reaching 160°F or higher. This accelerates material degradation — asphalt shingles lose granules faster, sealants dry out and crack, and flat roof membranes can blister. Choosing materials rated for extended UV exposure and scheduling regular maintenance are essential to getting full lifespan from any roof system in our climate.
Rain & Moisture
With an average of 62 inches of rainfall per year and frequent afternoon storms, South Florida puts extreme demands on roof drainage and waterproofing systems. Poor flashing, inadequate slope, or blocked drip edges can lead to water intrusion that damages decking, insulation, and interior finishes. We design every roof system with proper drainage pathways, redundant waterproofing layers, and sealed penetrations.
These environmental factors are why choosing a properly licensed, locally experienced roofing contractor matters so much in Broward and Palm Beach Counties. A roof that performs well in the Midwest or Pacific Northwest may fail within a few years under South Florida conditions. All Phase Construction USA has been navigating these exact challenges since 2006, with over 2,500 completed projects across the region. Our team understands the local building codes, permit processes, and material performance data specific to our area — because we live and work here.
Frequently Asked Questions About Our Roofing Services
What roofing services does All Phase Construction offer in South Florida?
All Phase Construction USA provides full-service residential and commercial roofing across Broward and Palm Beach Counties. Our services include roof replacement, roof repair, emergency leak repair, roof inspections (insurance, real estate, and preventive), and ongoing maintenance programs. We work with all major roofing materials — concrete tile, clay tile, metal standing seam, architectural shingles, TPO, PVC, modified bitumen, and built-up roofing (BUR) systems.
How much does a new roof cost in South Florida in 2026?
Roof replacement costs in South Florida depend on material, roof size, and code requirements. Typical ranges per square foot: asphalt shingles $5-$8, concrete tile $10-$18, metal standing seam $12-$20, and flat roof systems $8-$15. A standard 2,000 sq ft home usually falls between $12,000 and $35,000 depending on the material chosen. Use our free online roof cost calculator for a quick estimate, or call (754) 227-5605 for a no-obligation assessment.
Is All Phase Construction licensed for hurricane zone roofing?
Yes. All Phase Construction USA holds both a Certified Roofing Contractor license (CCC-1331464) and a Certified General Contractor license (CGC-1526236) from the State of Florida. We are fully certified for High-Velocity Hurricane Zone (HVHZ) work in Broward County and Miami-Dade County, meaning every installation meets the stringent 146 mph wind load requirements mandated by the Florida Building Code.
Do you offer financing for roof replacement?
Yes. We partner with Service Finance Company, LLC, an FHA Title I lender, to offer flexible payment plans for roof replacement projects. Homeowners can finance their new roof with competitive rates and manageable monthly payments. We handle the application process during your free roof assessment — most approvals come back the same day.
How long does a roof replacement take in Broward or Palm Beach County?
Most residential roof replacements in Broward and Palm Beach County take 2 to 5 days of active work, depending on the size and material. The full project timeline — from initial inspection through final permit closure — typically runs 3 to 6 weeks. This includes permit processing (which Broward County can take 2-3 weeks), material ordering, installation, and the required municipal inspections. We handle all permitting and scheduling.
Have more questions? Visit our comprehensive FAQ page or get in touch directly.